LTC4414EMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | PowerPath™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Battery Backup, Industrial/Automotive, High Current Switch |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 3V~36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4414 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 12V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Current - Supply | 33μA |
| FET Type | P-Channel |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 20μs |
| Delay Time - ON | 600μs |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4414EMS8#PBF Overview
The case comes in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) shape. In Tube cases, the part will be well protected. Part Surface Mount is mounted. With 3V~36V as its voltage, it is given a temperature of 0°C. It is not allowed for this component to operate below -40°C~85°C degrees. The component connected to Battery Backup, Industrial/Automotive, High Current Switch is a good match for this component. It is classified as a Source Selector Switch device by the manufacturer. P-Channel is the type of FET. The part is available with 8 terminations. 8 pins are used in the design of this product. The part is based on LTC4414. It is powered by 12V to deliver its perfomance. A maximum reflow temperature of this part is used if 260 is to be run. Using 33μA to run part supply current. As far as I know, the part belongs to the Power Management Circuits family. It is important that Vsup for this part does not fall below 3V. When Vsup reaches its maximum value, the maximum supply voltage is reached as soon as it reaches 36V. It delivers voltage at 12V. In the PowerPath? series, this device is one of the most popular devices.
LTC4414EMS8#PBF Features
in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case
FET Type: P-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
LTC4414EMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4414EMS8#PBF Ideal Diode controller applications.
- Industrial motor drives
- Active ORing for redundant power supplies
- Active OR-ing of Redundant (N+1) Power Supplies
- Asset tracker
- PCs
- MP3 Players
- Automotive infotainment systems - head unit,telematics control unit
- Active ORing for redundant power
- ADAS domain controller
- Power supply reverse polarity protection
