LTC4415EMSE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2011 |
| Series | PowerPath™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Battery Backup, High Current Switch |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 1.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC4415 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3.6V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Number of Channels | 2 |
| Current - Output (Max) | 4A |
| Adjustable Threshold | YES |
| Current - Supply | 44μA |
| FET Type | P-Channel |
| Supply Current-Max (Isup) | 0.08mA |
| Ratio - Input:Output | 2:2 |
| Internal Switch(s) | Yes |
| Height | 860μm |
| Length | 4.039mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC4415EMSE#PBF Overview
A 16-TFSOP (0.118, 3.00mm Width) Exposed Pad case is included. In this case, it is suitable to pack the part in a Tube case. Mounting is done along the Surface Mount-axis. The voltage that is applied to the circuit is 1.7V~5.5V. A minimum operating temperature of -40°C~125°C must not be reached by this component. Suitable for components connected in Battery Backup, High Current Switch. A Source Selector Switch device is categorized as such. In the case of FETs, P-Channel is recognized as the type. A 16 termination is available on the part. There are 16 pins on it. As you can see, this part is based on LTC4415. The performance of this device is powered by 3.6V. To run NOT SPECIFIED, we use the peak reflow temperature of this part. It is necessary to run the supply current of the part at 44μA in order to make it work. It is part of the Power Management Circuits family. Several 16 pins are incorporated into the part. Voltage supply (Vsup) for this part should not be less than 1.7V. If 0.08mA is greater than 0, the supply current (Isup) should conduct. The voltage at 3.6V can be delivered by it. 2 outputs are available in the system. It is possible for the chip to function when the output current conducts under the 4A axis. PowerPath? series is the model number of the device. There is no problem operating this device with a supply voltage of 5.5V.
LTC4415EMSE#PBF Features
in a 16-TFSOP (0.118, 3.00mm Width) Exposed Pad case
FET Type: P-Channel
16 terminations
Peak Reflow Temperature (Cel) : NOT SPECIFIED
2 outputs
operate supply voltage at 5.5V
LTC4415EMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4415EMSE#PBF Ideal Diode controller applications.
- Power supply reverse polarity protection
- Active ORing for redundant power
- Industrial motor drives
- Factory automation and control - PLC digital output modules
- Digital Cameras
- Active OR-ing of Redundant (N+1) Power Supplies
- PCs
- Modems
- Head Unit
- Building automation
