LTC4415IDHC#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2010 |
| Series | PowerPath™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Battery Backup, High Current Switch |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 1.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC4415 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-N16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.6V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Number of Channels | 2 |
| Current - Output (Max) | 4A |
| Adjustable Threshold | YES |
| Current - Supply | 44μA |
| FET Type | P-Channel |
| Supply Current-Max (Isup) | 0.08mA |
| Ratio - Input:Output | 2:2 |
| Internal Switch(s) | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4415IDHC#PBF Overview
A 16-WFDFN Exposed Pad case is included with it. A Tube case is a good choice for packing the part. Part Surface Mount is mounted. There is a voltage of 1.7V~5.5V applied to it. It is not allowed for this component to operate below -40°C~125°C degrees. The component connected in Battery Backup, High Current Switch is suitable for this component. It is classified as a Source Selector Switch device by the manufacturer. In the case of FETs, P-Channel is recognized as the type. The part comes with 16 terminations. Pins are attached to it using 16 pins. Using LTC4415 as a basis, the part is constructed. It is powered by 3.6V to deliver its perfomance. Run NOT SPECIFIED using this part's peak reflow temperature. It is necessary to run the supply current at 44μA for the part. It is part of the Power Management Circuits family. The minimum supply voltage (Vsup) for this part should not be less than 1.7V. In order to reach the maximum supply voltage, Vsup has to reach a value of 5.5V. The supply current (Isup) should conduct under 0.08mA. Voltage can be delivered at 3.6V by it. Unless the output current conducts below 4A, the chip cannot work. In the PowerPath? series, this device is one of the most popular devices.
LTC4415IDHC#PBF Features
in a 16-WFDFN Exposed Pad case
FET Type: P-Channel
16 terminations
Peak Reflow Temperature (Cel) : NOT SPECIFIED
LTC4415IDHC#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4415IDHC#PBF Ideal Diode controller applications.
- Asset tracker
- MP3 Players
- Head Unit
- Modems
- Reverse Polarity Protection
- PCs
- Building automation
- Electricity meters
- Power Tools
- AC Rectifier
