banner_page

LTC4415IDHC#TRPBF

LTC4415IDHC#TRPBF datasheet pdf and PMIC - OR Controllers, Ideal Diodes product details from Linear Technology/Analog Devices stock available at Noco


  • Manufacturer: Linear Technology/Analog Devices
  • Nocochips NO: 471-LTC4415IDHC#TRPBF
  • Package: 16-WFDFN Exposed Pad
  • Datasheet: PDF
  • Stock: 961
  • Description: LTC4415IDHC#TRPBF datasheet pdf and PMIC - OR Controllers, Ideal Diodes product details from Linear Technology/Analog Devices stock available at Noco(Kg)

Details

Tags

Parameters
Subcategory Power Management Circuits
Technology CMOS
Voltage - Supply 1.7V~5.5V
Terminal Position DUAL
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 2
Supply Voltage 3.6V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number LTC4415
Pin Count 16
JESD-30 Code R-PDSO-N16
Qualification Status Not Qualified
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.6V
Supply Voltage-Min (Vsup) 1.7V
Number of Channels 2
Current - Output (Max) 4A
Adjustable Threshold YES
Current - Supply 44μA
FET Type P-Channel
Supply Current-Max (Isup) 0.08mA
Ratio - Input:Output 2:2
Internal Switch(s) Yes
Height Seated (Max) 0.8mm
Length 5mm
Width 3mm
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 16-WFDFN Exposed Pad
Surface Mount YES
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Published 2010
Series PowerPath™
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Source Selector Switch
Terminal Finish Matte Tin (Sn)
Applications Battery Backup, High Current Switch
HTS Code 8542.39.00.01

LTC4415IDHC#TRPBF Overview


The case comes in 16-WFDFN Exposed Pad shape. In this case, it is suitable to pack the part in a Tape & Reel (TR) case. Part Surface Mount is mounted. The voltage is set to 1.7V~5.5V. It is essential that the minimal operating temperature of this component is not -40°C~125°C. It is suitable for the component connected in Battery Backup, High Current Switch. Device Source Selector Switch belongs to the Source Selector Switch category. A type of FET known as P-Channel is a type of FET that can be recognized by its symbol, which can be found on the package. In the part there are 16 terminations that are available. Pins are attached to it using 16 pins. Based on LTC4415, this part is manufactured. It is powered by 3.6V to deliver its perfomance. As part of the NOT SPECIFIED process, the peak reflow temperature of this part is utilized. The purpose of this is to make sure that the supply current for the component at 44μA is running as it should be. It is a part from the Power Management Circuits family. A voltage supply (Vsup) that is less than 1.7V should not be used for this part. A maximum voltage supply (Vsup) is reached at 5.5V. Under 0.08mA, the supply current (Isup) should flow. The voltage at 3.6V can be delivered by it. A chip can work when its output current drops below 4A. The device belongs to PowerPath? series.

LTC4415IDHC#TRPBF Features


in a 16-WFDFN Exposed Pad case
FET Type: P-Channel
16 terminations
Peak Reflow Temperature (Cel) : NOT SPECIFIED

LTC4415IDHC#TRPBF Applications


There are a lot of Linear Technology/Analog Devices LTC4415IDHC#TRPBF Ideal Diode controller applications.

  • Reverse Polarity Protection
  • Modems
  • Cell phones
  • Industrial transport
  • USB HUBs
  • Camera ECU
  • MP3 Players
  • Head Unit
  • Digital Cameras
  • Motor drives

Write a review

Note: HTML is not translated!
    Bad           Good