LTC4416EMS-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| Series | PowerPath™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Battery Backup, Industrial/Automotive, High Current Switch |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 3.6V~36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4416 |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-G10 |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 12V |
| Supply Voltage-Min (Vsup) | 3.6V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Current - Supply | 130μA |
| FET Type | P-Channel |
| Ratio - Input:Output | 2:2 |
| Internal Switch(s) | No |
| Delay Time - OFF | 30μs |
| Delay Time - ON | 60μs |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4416EMS-1#PBF Overview
The case that it comes in is called 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case. In this case, it is suitable to pack the part in a Tube case. There are two ways in which this part is mounted. We give it a voltage of 3.6V~36V. It is not acceptable to operate this component below -40°C~85°C degrees Celsius. A component connected in Battery Backup, Industrial/Automotive, High Current Switch would be a good fit for it. There is a Source Selector Switch category assigned to the device. In this case, the FET type can be recognized as P-Channel. The part comes with 10 terminations. It is designed with 10 pins. It is based on the LTC4416 component. 12V provides its performance. The peak reflow temperature of this part is used to run 260 on it. As the part at 130μA is running on a supply current, this is needed to ensure that the part can continue to run. A part from the Power Management Circuits family is what we are talking about. A voltage supply (Vsup) that is less than 3.6V should not be used for this part. 36V represents the maximum supply voltage (Vsup). It delivers voltage at 12V. A device from the PowerPath? series is in use.
LTC4416EMS-1#PBF Features
in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case
FET Type: P-Channel
10 terminations
Peak Reflow Temperature (Cel) : 260
LTC4416EMS-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4416EMS-1#PBF Ideal Diode controller applications.
- Industrial transport
- Automotive battery protection
- Modems
- Cell phones
- MP3 Players
- Automotive ADAS systems - camera
- PCs
- PDAs
- Industrial motor drives
- Motor drives
