LTC4416EMS-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PowerPath™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Battery Backup, Industrial/Automotive, High Current Switch |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 3.6V~36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4416 |
| Pin Count | 10 |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 12V |
| Supply Voltage-Min (Vsup) | 3.6V |
| Number of Channels | 1 |
| Operating Supply Current | 130μA |
| Adjustable Threshold | NO |
| Turn On Delay Time | 60 μs |
| FET Type | P-Channel |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 2:2 |
| Internal Switch(s) | No |
| Delay Time - ON | 60μs |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4416EMS-1#TRPBF Overview
A 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case is included. It is suited to pack the part in Tape & Reel (TR) case. The part is mounted in the way of Surface Mount. With 3.6V~36V as its voltage, it is given a temperature of 0°C. In order for this component to operate properly, its minimum operating temperature must not exceed -40°C~85°C. A component connected in Battery Backup, Industrial/Automotive, High Current Switch would be a good fit for it. There is a Source Selector Switch category assigned to the device. There is a P-Channel type of FET. In the part there are 10 terminations that are available. As you can see, it is designed with 10 pins. LTC4416 underpins the part. Performance is delivered through 12V. In order to run 260, a part's peak reflow temperature is utilized. It is part of the Power Management Circuits family. It is important to note that the part has 10 pins. This part should have a voltage supply of at least 3.6V (Vsup). 36V represents the maximum supply voltage (Vsup). It uses a current of 130μA for powering its operation. There is a capability of delivering voltage at 12V when the transformer is in operation. A device from the PowerPath? series is in use.
LTC4416EMS-1#TRPBF Features
in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case
FET Type: P-Channel
10 terminations
Peak Reflow Temperature (Cel) : 260
LTC4416EMS-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4416EMS-1#TRPBF Ideal Diode controller applications.
- PCs
- Power Tools
- Industrial motor drives
- PDAs
- Digital Radios
- Reverse Polarity Protection
- Electronic point of sale
- ADAS domain controller
- Building automation
- Active OR-ing of Redundant (N+1) Power Supplies
