LTC4420IMSE#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 12-TSSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | PowerPath™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Type | Source Selector Switch |
| Applications | Battery Backup |
| Technology | CMOS |
| Voltage - Supply | 1.8V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC4420 |
| Pin Count | 12 |
| Supply Voltage-Max (Vsup) | 18V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Number of Channels | 2 |
| Current - Output (Max) | 1.6A |
| Adjustable Threshold | YES |
| Current - Supply | 3.6μA |
| FET Type | N-Channel |
| Supply Current-Max (Isup) | 0.0063mA |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Height Seated (Max) | 1.1mm |
| Length | 4.039mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4420IMSE#TRPBF Overview
There is a 12-TSSOP (0.118, 3.00mm Width) Exposed Pad case that comes with it. Packing the part in Tape & Reel (TR) cases is ideal. In this case, the part is mounted in the direction of Surface Mount. An electric current of 1.8V~18V is applied to it. It must not be possible for this component to operate at -40°C~85°C°C as its minimum operating temperature. It is designed to fit the component that is connected in Battery Backup position. It is classified as a Source Selector Switch device by the manufacturer. In this case, the FET type can be recognized as N-Channel. A 12 termination is available on the part. 12 pins are used in the design of this product. Using LTC4420 as a basis, the part is constructed. Powered by 3.6V, it is capable of delivering its performance to its customers. A maximum reflow temperature of this part is used if NOT SPECIFIED is to be run. In order to run the supply current for the part at 3.6μA. In the part, you will find 12 pins. For this part, Vsup cannot be less than 1.8V. There is a limit to the maximum supply voltage when Vsup reaches 18V. There should be a current flow in the supply line (Isup) under 0.0063mA. It is possible for the chip to function when the output current is below 1.6A. In this case, we are dealing with a device from the PowerPath? series.
LTC4420IMSE#TRPBF Features
in a 12-TSSOP (0.118, 3.00mm Width) Exposed Pad case
FET Type: N-Channel
12 terminations
Peak Reflow Temperature (Cel) : NOT SPECIFIED
LTC4420IMSE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4420IMSE#TRPBF Ideal Diode controller applications.
- Active OR-ing of Redundant (N+1) Power Supplies
- Power supply reverse polarity protection
- Digital Radios
- Power Tools
- Camera ECU
- PDAs
- Modems
- MP3 Players
- Automotive ADAS systems - camera
- Active ORing for redundant power supplies
