LTC4440EMS8E-5#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4440 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Power Supplies | 6V |
| Input Type | Non-Inverting |
| Rise / Fall Time (Typ) | 10ns 7ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.065 µs |
| Output Peak Current Limit-Nom | 1.1A |
| Driven Configuration | High-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.4A 2.4A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.3V 1.6V |
| Turn Off Time | 0.065 µs |
| High Side Voltage - Max (Bootstrap) | 80V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4440EMS8E-5#PBF Overview
There is greater flexibility with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.Gate drivers is packaged in the way of Tube.The configuration is supported by 1 drivers.There is a mounting bracket in the way of Surface Mount.When the supply voltage is 4V~15V it is able to demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.The allowable temperature range that this device can be operated in is -40°C~125°C TJ.The input type is Non-Inverting.It's configured with 8 terminations.Under its base part number LTC4440, various related parts can be found.Mosfet driver is designed specifically to run on 6V volts of power.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.8 pins are present on the component.Maximum (Bootstrap) voltage is 80V.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 6V.
LTC4440EMS8E-5#PBF Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel MOSFET
High-side voltage - Max (Bootstrap) of 80V
LTC4440EMS8E-5#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4440EMS8E-5#PBF gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- General Purpose 3-Phase Inverter
- High frequency line drivers
- Broadcast equipment
- Industrial Motor Inverter - Power Tools, Robotics
- Motor Control
- Telecom switch mode power supplies
- Portable Media Players
- Isolated Supplies for controller area network (CAN),
- DC/DC converters
