LTC4441MPMSE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -55°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 5V~25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 7.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC4441 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Power Supplies | 7.5V |
| Propagation Delay | 36 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 36 ns |
| Rise Time | 13ns |
| Fall Time (Typ) | 8 ns |
| Rise / Fall Time (Typ) | 13ns 8ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1.8V 2V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4441MPMSE#PBF Overview
Gate drivers provides greater flexibilGate driversy to use the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package.Gate drivers is package in Tube case.There are 1 drivers installed for this device.In the direction of Surface Mount, gate drivers is mounted.In the absence of a 5V~25V supply voltage, it can demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.This device allows temperatures in the range of -55°C~125°C TJ.Non-Inverting is used as the input type.There are 10 terminations to form the base of its configuration.There are various related parts under its base part number LTC4441.During design, it is configured with 10 pins.Specification is for 7.5V supply voltage operation.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.There are several useful electronic components in this subcategory of MOSFET Drivers.The board has a total of 10 component pins.Due to its power supplies of 7.5V, it solves the power supply problem for a wide range of applications.
LTC4441MPMSE#PBF Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel MOSFET
10 pins
LTC4441MPMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4441MPMSE#PBF gate drivers applications.
- Portable computers
- Line drivers
- Refrigerator
- Industrial Motor Inverter - Power Tools, Robotics
- Industrial motor drives - compact, standard, premium, servo drives
- Motor controllers
- Commercial air-conditioning (CAC)
- High frequency line drivers
- DC/DC converters
- Isolated Supplies for Motor Control
