LTC4444EMS8E#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 7.2V~13.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4444 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 80ns |
| Fall Time (Typ) | 50 ns |
| Rise / Fall Time (Typ) | 8ns 5ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 2.5A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.5A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.85V 3.25V |
| Turn Off Time | 0.045 µs |
| High Side Voltage - Max (Bootstrap) | 114V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4444EMS8E#TRPBF Overview
There is greater flexibility with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.A package of Tape & Reel (TR) has been used.There are 2 drivers installed for this device.Its recommended mounting way is Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 7.2V~13.5V.A gate type of N-Channel MOSFET is used in its design.In this device, temperatures must not exceed -40°C~125°C TJ.Non-Inverting is the input type used in this program.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Many related parts can be found under its base part number LTC4444.A total of 8 pins are available on the device.Mosfet driver is designed specifically to run on 12V volts of power.The maximum output current can amount to 3A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board has a total of 8 component pins.A boot strap voltage of 114V is the maximum possible high-side voltage.
LTC4444EMS8E#TRPBF Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 114V
LTC4444EMS8E#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4444EMS8E#TRPBF gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- High-voltage isolated DC-DC converters
- Industrial Modules
- High power buffers
- Industrial Motor Inverter - Power Tools, Robotics
- Active filtering
- serial peripheral interface (SPI), I2C
- Dual-Battery Systems
- Smart Phones
- Digitally controlled power supplies
