LTC485IN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC485 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 900μA |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 200 ns |
| Transmit Delay-Max | 50 ns |
| Output Low Current-Max | 0.004A |
| High Level Input Current-Max | 0.000002A |
| Height | 3.302mm |
| Length | 10.16mm |
| Width | 6.477mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC485IN8#PBF Overview
Due to the enhanced 8-DIP (0.300, 7.62mm) package, this driver IC is excellent for driving common LEDs.The Tube package contains this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.This wide receiver can be placed on any Through Hole-type PCB or development board.It takes 4.75V~5.25V from the power supply to run this differential driver.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.With a supply voltage range of 5V, this line driver ic operates efficiently.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.ICs that are packaged with market standard pinouts are available on the market.LTC485 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.A 8-pin driver IC with enhanced power dissipation control is featured here.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Through Hole mounting techniques.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.There is usually a 1-bit resolution specified for this receiver when it is used.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.ICs implement a total of 1 transceivers.
LTC485IN8#PBF Features
Tube package
8 pin count
8 pins
5V power supply
LTC485IN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC485IN8#PBF Drivers/Receivers/Transceivers applications.
- Wireless 3D game
- Clock radio
- Military satellite communications
- Laser diode bonding
- Radio transmission
- Desktop PC
- IP cameras
- Routers
- Wireless communication
- Wireless access points
