LTC489ISW#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC489 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 10mA |
| Max Supply Current | 10mA |
| Data Rate | 10 Mbps |
| Differential Output | NO |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 0/4 |
| Receiver Number of Bits | 4 |
| Receiver Hysteresis | 60mV |
| Number of Drivers | 4 |
| ESD Protection | Yes |
| Receive Delay-Max | 55 ns |
| Height | 2.34mm |
| Length | 10.49mm |
| Width | 7.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC489ISW#PBF Overview
This driver chip is excellent for driving common LEDs due to its enhanced 16-SOIC (0.295, 7.50mm Width) package.This receiver is mounted in the Tube package.It has proved to be a valuable component for a variety of applications since it is a Receiver can transceiver.A Surface Mount-type PCB or development board can be used to place this wide receiver.This differential driver requires a 4.75V~5.25V power supply.There can be up to 0/4 eligible receivers/drivers on the field at the same time with this electronic part.For applications where the operating temperature is -40°C~85°C, this ic receiver was designed primarily.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.This wide receiver has 16 terminations for driving and receiving data signals.As a standard package, this transceiver comes with a 16-pin layout that follows the market standard.LTC489 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control driver IC featuring 16 pins.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.There are typically 4 bits of resolution specified in the specifications of this receiver.There is a 5V input voltage supply that can be used to operate this transceiver module.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.This electronic part can have?up to 4 eligible drivers on the field at once.?It is possible for this can transceiver to have mal-functions when its input current reaches or exceeds 10mA.
LTC489ISW#PBF Features
Tube package
16 pin count
16 pins
5V power supply
LTC489ISW#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC489ISW#PBF Drivers/Receivers/Transceivers applications.
- Optical sub-assembly (OSA)
- Datacom networking applications
- Notebook
- Home theater wiring-free
- Fiber distributed data interface (FDDI)
- transmission relay
- Satellite ground stations
- Desktop PC
- Military satellite communications
- Switches
