Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
10-WFDFN Exposed Pad |
Number of Pins |
10 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
1996 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
LTC6078 |
Pin Count |
10 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
5V |
Number of Channels |
2 |
Operating Supply Current |
55μA |
Output Current |
25mA |
Supply Current-Max |
0.164mA |
Min Input Voltage |
2.7V |
Slew Rate |
0.05V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
91 dB |
Current - Input Bias |
0.2pA |
Max Input Voltage |
5.5V |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V |
Output Current per Channel |
25mA |
Input Offset Voltage (Vos) |
10μV |
Bandwidth |
750 kHz |
Unity Gain BW-Nom |
750 kHz |
Voltage Gain |
130dB |
Average Bias Current-Max (IIB) |
0.00005μA |
Power Supply Rejection Ratio (PSRR) |
100dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Low-Bias |
YES |
Micropower |
YES |
Max Frequency |
10kHz |
Bias Current-Max (IIB) @25C |
0.000001μA |
Programmable Power |
NO |
Height |
700μm |
Length |
3mm |
Width |
3mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LTC6078CDD#PBF Overview
There is a 10-WFDFN Exposed Pad case package that contains the instrumentation amplifiers. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 10. In total, there are 10 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 3V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. An 10-pin op amp ic is included in the package. There is an input offset voltage of 10μV for this buffer op amp. For this electronic part, it is recommended that you mount it with type Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. A supply current of 55μA can be used to operate this linear amplifier. Keeping the voltage gain at 130dB is the best course of action. There are a total of 2 channels available on the op amps. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of instrumentation amplifier is rated 5V voltage.
LTC6078CDD#PBF Features
10 Pins
supply voltage of 3V
130dB voltage gain
Output Type: Rail-to-Rail
LTC6078CDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6078CDD#PBF Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Medical imaging
- Blood pressure sensors
- Portable docking station
- Strain gauges
- Precision measurement
- Multiplication circuits
- Wireless base stations
- Active probe
- Ultrasound transducers