LTC6078IDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6078 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Operating Supply Current | 55μA |
| Nominal Supply Current | 110μA |
| Slew Rate | 0.05V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 91 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 10μV |
| Bandwidth | 750 kHz |
| Unity Gain BW-Nom | 750 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000001μA |
| Programmable Power | NO |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6078IDD#PBF Overview
There is a 10-WFDFN Exposed Pad case package that contains the instrumentation amplifiers. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Tube case. We are approaching the 10h termination of the year. The pins on this board total to 10 in total. It is important to remember that this op amp should be operated at a voltage of 3V volts. It should be noted that this op amp is a type of Operational Amplifier device. 10 pins are available on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 10μV. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 55μA . 130dB should be the voltage gain. On the buffer amps, there are 2 channels that can be used. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages.
LTC6078IDD#PBF Features
10 Pins
supply voltage of 3V
130dB voltage gain
Output Type: Rail-to-Rail
LTC6078IDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6078IDD#PBF Instrumentational OP Amps applications.
- Thermocouples
- Power control
- Video computer boards
- Car stereo
- Portable docking station
- Signal filtering
- Micro signal measurement
- Mobile phone
- earphone
- Broadcasting
