LTC6081CMS8#PBF
| Parameters | |
|---|---|
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 70μV |
| Current - Output / Channel | 24mA |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000001μA |
| Voltage Gain-Min | 316000 |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6081 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Circuits | 2 |
| Current - Supply | 340μA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Gain Bandwidth Product | 3.5MHz |
| Unity Gain BW-Nom | 3600 kHz |
| Average Bias Current-Max (IIB) | 0.00004μA |
| Low-Offset | YES |
LTC6081CMS8#PBF Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. General Purpose-type instrumentation amplifiers are used in this application. A Tube case is used for delivering the op amp. The number of terminations approaches 8. A total of 8 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. Instrumentation amplifier is a part of Operational Amplifier. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . During the manufacturing process, this buffer amplifier is divided into 2 circuits. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. For optimal performance, this electrical part should be connected to a supply with a current of 340μA. There is a minimum voltage gain of 316000 that this buffer op amp is capable of conducting.
LTC6081CMS8#PBF Features
8 Pins
supply voltage of 3V
Output Type: Rail-to-Rail
LTC6081CMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6081CMS8#PBF Instrumentational OP Amps applications.
- Laptop
- Hand-held batteries
- Voltage regulation circuit
- Addition operation circuits
- Video data acquisition
- Image computer boards
- Video computer boards
- Band-stop filter
- Integrator circuits
- Cinema or auditorium audio system
