LTC6081HMS8#PBF
| Parameters | |
|---|---|
| Gain Bandwidth Product | 3.5MHz |
| Unity Gain BW-Nom | 3600 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0005μA |
| Power Supply Rejection Ratio (PSRR) | 98dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000001μA |
| Nominal Gain Bandwidth Product | 3.6MHz |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6081 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Operating Supply Current | 340μA |
| Supply Current-Max | 0.93mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 21mA |
| Input Offset Voltage (Vos) | 70μV |
| Bandwidth | 3.6MHz |
LTC6081HMS8#PBF Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be 8 terminations in the next few months. The total number of pins on linear amplifier is 8. I would like to remind you that this buffer op amp should be powered by an 3V battery. Instrumentation amplifier is a part of Operational Amplifier. The op amp ic has an array of 8 pins on it. In terms of the input offset voltage, instrumentation amplifier rates at 70μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 340μA . It is recommended to keep the voltage gain at 120dB at all times. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. A voltage rating of 2 is indicated for the op amp's operating supply voltage.
LTC6081HMS8#PBF Features
8 Pins
supply voltage of 3V
120dB voltage gain
Output Type: Rail-to-Rail
LTC6081HMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6081HMS8#PBF Instrumentational OP Amps applications.
- Home audio systems
- pH (acidity)
- Communication
- Mobile phone
- Medical instruments
- Video computer boards
- Active probe
- Video data acquisition
- Strain gauges
- earphone
