LTC6081IMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6081 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Circuits | 2 |
| Current - Supply | 340μA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Gain Bandwidth Product | 3.5MHz |
| Unity Gain BW-Nom | 3600 kHz |
| Average Bias Current-Max (IIB) | 0.00004μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 70μV |
| Current - Output / Channel | 24mA |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000001μA |
| Voltage Gain-Min | 316000 |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC6081IMS8#PBF Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. Buffer amps of this type are called General Purpose-types. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 8. It consists of a total of 8 pins in total. The linear amplifier should be run at 3V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. This op amp contains 2 circuits. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. For optimal performance, this electrical part should be connected to a supply with a current of 340μA. The minimum voltage gain this buffer op amp is able to conduct is 316000.
LTC6081IMS8#PBF Features
8 Pins
supply voltage of 3V
Output Type: Rail-to-Rail
LTC6081IMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6081IMS8#PBF Instrumentational OP Amps applications.
- Hand-held batteries
- Automotive sensors
- Communication
- Laptop
- Non-polarized electrodes
- Semiconductor detectors
- High input resistance broadband
- Industrial applications including automation
- Fast A/D and D/A converters
- Vehicle electronics
