LTC6082HGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6082 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Operating Supply Current | 340μA |
| Supply Current-Max | 1.86mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 21mA |
| Input Offset Voltage (Vos) | 70μV |
| Gain Bandwidth Product | 3.5MHz |
| Unity Gain BW-Nom | 3600 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0005μA |
| Power Supply Rejection Ratio (PSRR) | 98dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000001μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3.6MHz |
| Wideband | NO |
| Height Seated (Max) | 1.75mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6082HGN#PBF Overview
Packaged in a 16-SSOP (0.154, 3.90mm Width) case, the buffer op amp is ready to use. General Purpose-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 16. In total, there are 16 pins on this op amp ic. The linear amplifier should be run at 3V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. 16 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 70μV voltage. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. An 340μA volt supply current is needed for this linear amplifier to operate. Keeping the voltage gain at 120dB is the best course of action. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. For the operating supply voltage of the op amp ic, there is a rating of 4.
LTC6082HGN#PBF Features
16 Pins
supply voltage of 3V
120dB voltage gain
Output Type: Rail-to-Rail
LTC6082HGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6082HGN#PBF Instrumentational OP Amps applications.
- Exponential operation circuits
- Band-pass filter
- Ultrasound transducers
- Thermocouples
- Precision measurement
- Fission chambers
- Navigation
- Weighing systems
- Multimedia playback equipment
- Signal amplification
