LTC6084CMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC6084 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Operating Supply Current | 110μA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Output Current per Channel | 12.5mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 1.5MHz |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 133.98dB |
| Average Bias Current-Max (IIB) | 0.00004μA |
| Power Supply Rejection Ratio (PSRR) | 94dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Nominal Gain Bandwidth Product | 1.5MHz |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC6084CMS8#PBF Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. A General Purpose-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. Linear amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 2.5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 300μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. Using an 110μA supply current, this operational amplifier ics can be operated. 133.98dB should be the voltage gain. Instrumentation amplifier has 2 channels on it. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits.
LTC6084CMS8#PBF Features
8 Pins
supply voltage of 2.5V
133.98dB voltage gain
Output Type: Rail-to-Rail
LTC6084CMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6084CMS8#PBF Instrumentational OP Amps applications.
- Portable docking station
- Wireless base stations
- Fast A/D and D/A converters
- Non-polarized electrodes
- Communication device
- Home audio systems
- Television
- Television broadcasting equipment
- Weighing systems
- single/dual op amp sum and difference circuits
