LTC6084HDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6084 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Circuits | 2 |
| Operating Supply Current | 110μA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Output Current per Channel | 12.5mA |
| Input Offset Voltage (Vos) | 300μV |
| Gain Bandwidth Product | 1.5MHz |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 133.98dB |
| Average Bias Current-Max (IIB) | 0.00075μA |
| Power Supply Rejection Ratio (PSRR) | 94dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6084HDD#PBF Overview
There is a 10-WFDFN Exposed Pad case package that contains the instrumentation amplifiers. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tube case. During the past two weeks, there have been close to 10 terminations. There are a total of 10 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. There are 10 pins on this chip. Op amp rates 300μV as input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Using a supply current of 110μA , this buffer op amp will be able to operate. Keeping the voltage gain at 133.98dB is the best course of action. During the manufacturing process, this buffer amplifier is divided into 2 circuits. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages.
LTC6084HDD#PBF Features
10 Pins
supply voltage of 2.5V
133.98dB voltage gain
Output Type: Rail-to-Rail
LTC6084HDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6084HDD#PBF Instrumentational OP Amps applications.
- Division circuits
- Weak signal detection
- Differentiator circuits
- Fast A/D and D/A converters
- Portable docking station
- Subtraction operation circuits
- High gain DC amplifier
- Micro signal measurement
- Comparator
- Information processing
