LTC6087HDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6087 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Circuits | 2 |
| Operating Supply Current | 1.05mA |
| Slew Rate | 7.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 330μV |
| Gain Bandwidth Product | 14MHz |
| Unity Gain BW-Nom | 14000 kHz |
| Voltage Gain | 135.56dB |
| Average Bias Current-Max (IIB) | 0.0005μA |
| Power Supply Rejection Ratio (PSRR) | 93dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6087HDD#PBF Overview
A 10-WFDFN Exposed Pad case is used to package the op amp. This is a General Purpose type op amp. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations approaches 10. The total number of pins on linear amplifier is 10. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 10 pins are available on the instrumentation amplifier. The input offset voltage is 330μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIn order for this instrumentation amplifier to operate, the supply current needs to be between 1.05mA and 10 . There should be no change in the voltage gain. On this instrumentation amplifier, there are 2 circuits that are connected together. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals.
LTC6087HDD#PBF Features
10 Pins
supply voltage of 3V
135.56dB voltage gain
Output Type: Rail-to-Rail
LTC6087HDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6087HDD#PBF Instrumentational OP Amps applications.
- Weak signal detection
- Video amplifiers
- Commercial audio systems
- Logarithmic operation circuits
- Signal transformation
- Division circuits
- Tablets
- Integrator circuits
- Video conversion and routing
- Medical instruments
