Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2014 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
LTC6090 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Power Supplies |
+-70V |
Number of Circuits |
1 |
Operating Supply Current |
2.7mA |
Supply Current-Max |
4.2mA |
Slew Rate |
21V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
105 dB |
Current - Input Bias |
3pA |
Voltage - Supply, Single/Dual (±) |
9.5V~140V ±4.75V~70V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
330μV |
Bandwidth |
10MHz |
Gain Bandwidth Product |
12MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
12000 kHz |
Voltage Gain |
141.58dB |
Average Bias Current-Max (IIB) |
0.00005μA |
Power Supply Rejection Ratio (PSRR) |
105dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
75V |
Low-Bias |
YES |
Micropower |
NO |
Programmable Power |
NO |
Neg Supply Voltage-Max (Vsup) |
-75V |
Length |
5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LTC6090CFE#PBF Overview
The linear amplifier is packaged in a 16-TSSOP (0.173, 4.40mm Width) Exposed Pad case. An op amp of this type is a General Purpose-type. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 16. Linear amplifier has a total of 16 pins. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. In total, the buffer amplifier consists of 16 pins. In terms of input offset voltage, operational amplifier rates 330μV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. Using an 2.7mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 141.58dB at all times. There are 1 circuits on this op amp. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages.
LTC6090CFE#PBF Features
16 Pins
supply voltage of 15V
141.58dB voltage gain
Output Type: Rail-to-Rail
LTC6090CFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6090CFE#PBF Instrumentational OP Amps applications.
- pH (acidity)
- Communication device
- Automotive sensors
- Polarized electrodes
- High speed sample
- Automatic control
- Television broadcasting equipment
- Fission chambers
- High-frequency data acquisition systems
- Exponential operation circuits