LTC6090CS8E#TRPBF
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC6090 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-70V |
| Number of Circuits | 1 |
| Operating Supply Current | 2.7mA |
| Supply Current-Max | 4.2mA |
| Slew Rate | 21V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 9.5V~140V ±4.75V~70V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 330μV |
| Bandwidth | 10MHz |
| Gain Bandwidth Product | 12MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 12000 kHz |
| Voltage Gain | 141.58dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 75V |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -75V |
| Length | 4.9025mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
LTC6090CS8E#TRPBF Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) Exposed Pad case is used. General Purpose-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 15V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 330μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. A supply current of 2.7mA can be used to operate this linear amplifier. 141.58dB should remain the voltage gain. The buffer amp consists of 1 circuits in total. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The instrumentation amplifier is packed in the form of TAPE AND REEL.
LTC6090CS8E#TRPBF Features
8 Pins
supply voltage of 15V
141.58dB voltage gain
Output Type: Rail-to-Rail
LTC6090CS8E#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6090CS8E#TRPBF Instrumentational OP Amps applications.
- Division circuits
- Automatic control
- Radar
- Power generator
- Professional videography
- Broadcasting
- Multiplication circuits
- Comparator
- Inverse/same-phase proportional circuit
- Automotive sensors
