LTC6090HS8E#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC6090 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-70V |
| Number of Circuits | 1 |
| Current - Supply | 2.8mA |
| Slew Rate | 21V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 140 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 9.5V~140V ±4.75V~70V |
| Gain Bandwidth Product | 12MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 12000 kHz |
| Average Bias Current-Max (IIB) | 0.0008μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 75V |
| Voltage - Input Offset | 330μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -75V |
| Wideband | NO |
| Power | NO |
| Voltage Gain-Min | 400000 |
| Length | 4.9025mm |
| RoHS Status | ROHS3 Compliant |
LTC6090HS8E#PBF Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) Exposed Pad case. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tube case. It is estimated that there will be 8 terminations in the next few months. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 15V volts. This particular linear amplifier is a type of Operational Amplifier device, to be precise. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . On this instrumentation amplifier, there are 1 circuits that are connected together. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. A supply of 2.8mA or higher is recommended for use with this electronic part. This op amp ic is capable of conducting at least 400000 voltage gains.
LTC6090HS8E#PBF Features
8 Pins
supply voltage of 15V
Output Type: Rail-to-Rail
LTC6090HS8E#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6090HS8E#PBF Instrumentational OP Amps applications.
- Video data acquisition
- Medical instruments
- Subtraction operation circuits
- Computer workstations
- Communication device
- Information processing
- Power transmission
- Band-pass filter
- Tablets
- Multimedia playback equipment
