LTC6090IFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC6090 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-70V |
| Number of Circuits | 1 |
| Operating Supply Current | 2.7mA |
| Nominal Supply Current | 2.7mA |
| Output Current | 10mA |
| Slew Rate | 21V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 9.5V~140V ±4.75V~70V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 330μV |
| Bandwidth | 10MHz |
| Gain Bandwidth Product | 12MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 12000 kHz |
| Voltage Gain | 141.58dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 75V |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -75V |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6090IFE#PBF Overview
The linear amplifier is packaged in a 16-TSSOP (0.173, 4.40mm Width) Exposed Pad case which makes it easy for the consumer to handle. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 16 terminations this year. There are a total of 16 pins on this op amp. Please take in mind that op amp should be run at 15V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. Linear amplifier includes 16 pins. With regard to input offset voltage, instrumentation amplifier is rated at 330μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Using an 2.7mA supply current, this operational amplifier ics can be operated. Maintain 141.58dB as the voltage gain. In total, there are 1 circuits on this buffer amplifier. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals.
LTC6090IFE#PBF Features
16 Pins
supply voltage of 15V
141.58dB voltage gain
Output Type: Rail-to-Rail
LTC6090IFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6090IFE#PBF Instrumentational OP Amps applications.
- Commercial audio systems
- Addition operation circuits
- Professional videography
- Portable electronic products powered by batteries
- Signal filtering
- Test equipment
- E-book readers
- Proportional operation circuits
- Ultrasound transducers
- Subtraction operation circuits
