LTC6101ACMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6101 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 60V |
| Power Supplies | 4/60V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 375μA |
| Max Supply Current | 640μA |
| Amplifier Type | Current Sense |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 4V~60V |
| Output Current per Channel | 1mA |
| Input Offset Voltage (Vos) | 150μV |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Voltage - Input Offset | 85μV |
| Nominal Gain Bandwidth Product | 200 kHz |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6101ACMS8#PBF Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. Current Sense-type instrumentation amplifiers are used in this application. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. In total, there are 8 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 12V. I would like to specify that this buffer amplifier belongs to the Other Analog ICs-type of devices. The buffer op amp includes 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 150μV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 375μA and 10 . A linear amplifier like this has 1 circuits on it. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of instrumentation amplifier is rated 5V voltage. An analog IC known as ANALOG CIRCUIT is also used in this linear amplifier.
LTC6101ACMS8#PBF Features
8 Pins
supply voltage of 12V
LTC6101ACMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6101ACMS8#PBF Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- PDA
- Non-polarized electrodes
- Biopotential
- Laptop
- Automatic control
- Logarithmic operation circuits
- Proportional counter tubes
- RF cable systems
