LTC6240CS5#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6240 |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Circuits | 1 |
| Current - Supply | 2mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.8V~6V |
| Gain Bandwidth Product | 18MHz |
| Unity Gain BW-Nom | 17000 kHz |
| Average Bias Current-Max (IIB) | 0.000075μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 50μV |
| Current - Output / Channel | 30mA |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.000075μA |
| Voltage Gain-Min | 60000 |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
LTC6240CS5#TRMPBF Overview
A SOT-23-5 Thin, TSOT-23-5 case is used to package the op amp. This is a General Purpose type op amp. A Tape & Reel (TR) case is used for delivering the op amp. A total of 5 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 5. Please take in mind that this instrumentation amplifier should be run at 3V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . This op amp contains 1 circuits. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. There is a recommendation that this electrical part be used with a supply with 2mA current rating. The minimum voltage gain this buffer op amp is able to conduct is 60000.
LTC6240CS5#TRMPBF Features
5 Pins
supply voltage of 3V
Output Type: Rail-to-Rail
LTC6240CS5#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6240CS5#TRMPBF Instrumentational OP Amps applications.
- Communication
- Video data acquisition
- Computer workstations
- Power control
- High-frequency data acquisition systems
- Displayers for aircraft and air transportation control systems
- Professional videography
- Video conversion and routing
- Polarized electrodes
- MP3
