LTC6240HVCS5#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6240 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 2.7mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 2.8V~11V ±1.4V~5.5V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 40μV |
| Bandwidth | 18MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 18000 kHz |
| Voltage Gain | 124.08dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 60μV |
| Low-Bias | YES |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Nominal Gain Bandwidth Product | 18MHz |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
LTC6240HVCS5#TRMPBF Overview
In order to protect the op amps, a SOT-23-5 Thin, TSOT-23-5 case is used. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. We are approaching the 5h termination of the year. The pins on this board total to 5 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The op amp ic has an array of 5 pins on it. In terms of input offset voltage, operational amplifier rates 40μV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. It is possible to operate this buffer amplifier from a supply current of 2.7mA . Voltage gain should remain at 124.08dB. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. This linear amplifier has a total of 1 elements. The instrumentation amplifier is packed in the form of TAPE AND REEL.
LTC6240HVCS5#TRMPBF Features
5 Pins
supply voltage of 5V
124.08dB voltage gain
Output Type: Rail-to-Rail
LTC6240HVCS5#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6240HVCS5#TRMPBF Instrumentational OP Amps applications.
- Vehicle electronics
- earphone
- Proportional operation circuits
- Fast A/D and D/A converters
- Portable media players
- Subtraction operation circuits
- Exponential operation circuits
- Professional videography
- High-frequency data acquisition systems
- RF cable systems
