LTC6240HVHS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6240 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5/+-5V |
| Number of Circuits | 1 |
| Operating Supply Current | 2.7mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 2.8V~11V ±1.4V~5.5V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 40μV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 12000 kHz |
| Voltage Gain | 124.08dB |
| Average Bias Current-Max (IIB) | 0.0025μA |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 60μV |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.000075μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Nominal Gain Bandwidth Product | 18MHz |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6240HVHS8#PBF Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Op amps are General Purpose types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tube case. We are approaching the 8h termination of the year. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. There is an input offset voltage of 40μV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. An 2.7mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 124.08dB. On this instrumentation amplifier, there are 1 circuits that are connected together. On the output type, there are Rail-to-Rail different types of op amps. As a whole, there are 1 elements that make up this buffer amplifier.
LTC6240HVHS8#PBF Features
8 Pins
supply voltage of 5V
124.08dB voltage gain
Output Type: Rail-to-Rail
LTC6240HVHS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6240HVHS8#PBF Instrumentational OP Amps applications.
- Digital cameras
- single/dual op amp sum and difference circuits
- Power control
- High input resistance broadband
- Gaming industry
- Radar
- Large motor controllers
- Automatic control
- Navigation
- Inverse/same-phase proportional circuit
