LTC6241CDD#PBF
| Parameters | |
|---|---|
| Voltage - Supply, Single/Dual (±) | 2.8V~6V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 18MHz |
| Unity Gain BW-Nom | 17000 kHz |
| Voltage Gain | 124.08dB |
| Average Bias Current-Max (IIB) | 0.000075μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6241 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Number of Circuits | 2 |
| Operating Supply Current | 1.8mA |
| Supply Current-Max | 4.6mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.2pA |
LTC6241CDD#PBF Overview
The linear amplifier is packaged in a 8-WFDFN Exposed Pad case which makes it easy for the consumer to handle. An op amp ic of the General Purpose type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The buffer op amp includes 8 pins. Op amp ic rates 100μV for input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. An 1.8mA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 124.08dB. This op amp ic has 2 circuits. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. There are 2 elements in this buffer amplifier.
LTC6241CDD#PBF Features
8 Pins
supply voltage of 3V
124.08dB voltage gain
Output Type: Rail-to-Rail
LTC6241CDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6241CDD#PBF Instrumentational OP Amps applications.
- Video conversion and routing
- Oscilloscopes
- Comparator
- High-frequency data acquisition systems
- Weighing systems
- Biopotential
- Commercial audio systems
- Television broadcasting equipment
- Video computer boards
- Fast A/D and D/A converters
