Parameters |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Package / Case |
SOIC |
Number of Pins |
8 |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Number of Elements |
2 |
Number of Channels |
2 |
Number of Circuits |
2 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2.8V |
Operating Supply Current |
2.5mA |
Slew Rate |
10 V/μs |
Common Mode Rejection Ratio |
78 dB |
Current - Input Bias |
500 fA |
Output Current per Channel |
35mA |
Input Offset Voltage (Vos) |
40μV |
Gain Bandwidth Product |
12MHz |
Voltage Gain |
124.08dB |
Power Supply Rejection Ratio (PSRR) |
78dB |
Max Dual Supply Voltage |
5.5V |
Min Dual Supply Voltage |
1.4V |
Nominal Gain Bandwidth Product |
18MHz |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
LTC6241HVHS8#PBF Overview
In the package, you will find a SOIC-case to contain the op amp ic. It has 8 pins that make up the linear amplifier. The input offset voltage is 40μV. Using a supply current of 2.5mA , this buffer op amp will be able to operate. 124.08dB should be the voltage gain. On this buffer amplifier, there are 2 circuits. The op amp ic has 2 channels on it. For this linear amplifier to work, the temperature should not be below -40°C. Use op amp only at temperatures no higher than 125°C. The linear amplifier consists of 2 different elements in total. The electrical part is capable of being powered by a voltage of under 12V, which means that it can be used with any voltage supply. Keeping the linear amplifier's supply voltage above 2.8V is recommended. As a general rule, you should conduct this electronic component under dual supply voltages of 5.5V volts.
LTC6241HVHS8#PBF Features
124.08dB voltage gain
LTC6241HVHS8#PBF Applications
There are a lot of Analog Devices, Inc. LTC6241HVHS8#PBF Instrumentational OP Amps applications.
- Signal amplification
- High-frequency data acquisition systems
- Proportional operation circuits
- Television
- Hand-held batteries
- Power transmission
- Fast A/D and D/A converters
- Communication
- Radiation thermometry transducers
- Addition operation circuits