LTC6241IS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6241 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Operating Supply Current | 1.8mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.8V~6V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 40μV |
| Gain Bandwidth Product | 18MHz |
| Unity Gain BW-Nom | 17000 kHz |
| Voltage Gain | 124.08dB |
| Average Bias Current-Max (IIB) | 0.000075μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 18MHz |
| Wideband | NO |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
LTC6241IS8#PBF Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. A General Purpose-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 8 terminations this year. There are a total of 8 pins on this op amp. This linear amplifier should be powered by an 3V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 40μV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. This op amp can operate from a supply current at 1.8mA. Voltage gain should remain at 124.08dB. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer.
LTC6241IS8#PBF Features
8 Pins
supply voltage of 3V
124.08dB voltage gain
Output Type: Rail-to-Rail
LTC6241IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6241IS8#PBF Instrumentational OP Amps applications.
- Information processing
- MP3
- Non-polarized electrodes
- Inverse/same-phase proportional circuit
- High input resistance broadband
- Cinema or auditorium audio system
- Test and measurement instruments
- Automation control systems
- Band-pass filter
- Medical imaging
