LTC6242IDHC#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6242 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Circuits | 4 |
| Operating Supply Current | 1.8mA |
| Supply Current-Max | 9.6mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.8V~6V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 18MHz |
| Unity Gain BW-Nom | 17000 kHz |
| Voltage Gain | 124.08dB |
| Average Bias Current-Max (IIB) | 0.000075μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6242IDHC#PBF Overview
The linear amplifier is packaged in a 16-WFDFN Exposed Pad case. An op amp of this type is a General Purpose-type. A Tube case is used to deliver the buffer op amp. There is a growing number of terminations approaching the number of 16. Buffer amplifier has a total of 16 pins on it. The linear amplifier should be run at 3V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. A total of 16 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 100μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 1.8mA . There should be no change in the voltage gain at 124.08dB. There are 4 circuits on op amps. On the output type, there are Rail-to-Rail different types of op amps.
LTC6242IDHC#PBF Features
16 Pins
supply voltage of 3V
124.08dB voltage gain
Output Type: Rail-to-Rail
LTC6242IDHC#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6242IDHC#PBF Instrumentational OP Amps applications.
- Automatic control
- Professional videography
- Laptop
- Biopotential
- Measurements of Wheatstone bridge
- Signal amplification
- Fast A/D and D/A converters
- Weak signal detection
- Video conversion and routing
- Division circuits
