LTC6244CDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC6244 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Number of Circuits | 2 |
| Operating Supply Current | 6.25mA |
| Slew Rate | 35V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 74 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.8V~6V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 50MHz |
| Unity Gain BW-Nom | 50000 kHz |
| Voltage Gain | 127.96dB |
| Average Bias Current-Max (IIB) | 0.000075μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC6244CDD#PBF Overview
Op amp is packaged in 8-WFDFN Exposed Pad case. General Purpose-type instrumentation amplifiers are used in this application. A Tube case is used to deliver the buffer op amp. A total of 8 terminations have been reported in the past few weeks. The pins on this board total to 8 in total. Please take in mind that this instrumentation amplifier should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 8 pins. Op amp rates 100μV as input offset voltage. This electronic part is best mounted with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureUsing an 6.25mA supply current, this operational amplifier ics can be operated. It is a member of the 127.96dB's 127.96dB family. There are 2 circuits on op amps. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply.
LTC6244CDD#PBF Features
8 Pins
supply voltage of 5V
127.96dB voltage gain
Output Type: Rail-to-Rail
LTC6244CDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6244CDD#PBF Instrumentational OP Amps applications.
- MP3
- High speed sample
- Wireless base stations
- Semiconductor detectors
- Gaming industry
- Signal transformation
- Differentiator circuits
- Blood pressure sensors
- Micro signal measurement
- Test equipment
