LTC6246CS6#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC6246 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 2.7/5V |
| Number of Circuits | 1 |
| Operating Supply Current | 1.25mA |
| Slew Rate | 90V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 400nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.25V ±1.25V~2.625V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 50μV |
| Unity Gain BW-Nom | 180000 kHz |
| Voltage Gain | 93.06dB |
| Power Supply Rejection Ratio (PSRR) | 69dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 120MHz |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 180MHz |
| Wideband | NO |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6246CS6#TRMPBF Overview
A SOT-23-6 Thin, TSOT-23-6 case is used to package the op amp. This is a General Purpose type op amp. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations approaches 6. A total of 6 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. In total, the buffer amplifier consists of 6 pins. Regarding input offset voltage, op amp rates 50μV. Surface Mount is the recommended mounting type for this linear amplifier. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. A supply current of 1.25mA can be used to operate this linear amplifier. There should be no change in the voltage gain. There are 1 circuits on op amps. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. It is used TAPE AND REEL to pack the op amps.
LTC6246CS6#TRMPBF Features
6 Pins
supply voltage of 5V
93.06dB voltage gain
Output Type: Rail-to-Rail
LTC6246CS6#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6246CS6#TRMPBF Instrumentational OP Amps applications.
- Automotive sensors
- Information processing
- Semiconductor detectors
- Band-pass filter
- Television
- Active probe
- Fission chambers
- Tablets
- Wireless base stations
- earphone
