LTC6246HS6#TRMPBF

1 Channels 100mA per Channel 400nA 78 dB Instrumentational OP Amps SOT-23-6

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LTC6246HS6#TRMPBF
Package: SOT-23-6
Datasheet: PDF
Stock: 338
Description: 1 Channels 100mA per Channel 400nA 78 dB Instrumentational OP Amps SOT-23-6(Kg)

Details

Tags

Parameters
Gain Bandwidth Product	180MHz
Voltage Gain	93.06dB
Power Supply Rejection Ratio (PSRR)	69dB
-3db Bandwidth	120MHz
Nominal Gain Bandwidth Product	180MHz
Number of Amplifiers	1
REACH SVHC	No SVHC
RoHS Status	RoHS Compliant
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Package / Case	SOT-23-6
Number of Pins	6
Packaging	Cut Tape
Max Operating Temperature	125°C
Min Operating Temperature	-40°C
Number of Elements	1
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	5.25V
Min Supply Voltage	2.5V
Operating Supply Current	1.25mA
Slew Rate	90 V/μs
Common Mode Rejection Ratio	78 dB
Current - Input Bias	400nA
Output Current per Channel	100mA
Input Offset Voltage (Vos)	50μV
Bandwidth	180MHz

LTC6246HS6#TRMPBF Overview

In order to protect the op amps, a SOT-23-6 case is used. In the case of Cut Tape cases, linear amplifier will be delivered. In total, the buffer amplifier consists of 6 pins. In terms of the input offset voltage, instrumentation amplifier rates at 50μV. The buffer amplifier is capable of operating from a supply current of 1.25mA . You should keep the voltage gain at 93.06dB for the time being. A linear amplifier like this has 1 circuits on it. As far as the device is concerned, buffer amplifier has 1 channels. It should not lower than -40°C to operate buffer amplifier. No temperature greater than 125°C should be used. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. This electric component can work from a voltage of under 5.25V as far as supply voltage is concerned. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.5V. There are 1 amplifiers on it.