LTC6246IS6#TRMPBF

1 Channels 100mA per Channel 400nA 78 dB Instrumentational OP Amps SOT-23-6

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LTC6246IS6#TRMPBF
Package: SOT-23-6
Datasheet: PDF
Stock: 636
Description: 1 Channels 100mA per Channel 400nA 78 dB Instrumentational OP Amps SOT-23-6(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Package / Case	SOT-23-6
Number of Pins	6
Packaging	Cut Tape
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Number of Elements	1
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	5.25V
Min Supply Voltage	2.5V
Operating Supply Current	1.25mA
Slew Rate	90 V/μs
Common Mode Rejection Ratio	78 dB
Current - Input Bias	400nA
Output Current per Channel	100mA
Input Offset Voltage (Vos)	50μV
Bandwidth	180MHz
Gain Bandwidth Product	180MHz
Voltage Gain	93.06dB
Power Supply Rejection Ratio (PSRR)	69dB
-3db Bandwidth	120MHz
Nominal Gain Bandwidth Product	180MHz
RoHS Status	RoHS Compliant
Lead Free	Lead Free

LTC6246IS6#TRMPBF Overview

In order to protect the op amps, a SOT-23-6 case is used. There is a Cut Tape case that is delivered with the instrumentation amplifiers. 6 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 50μV. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.25mA and 10 . 93.06dB should remain the voltage gain. This op amp contains 1 circuits. Op amp ic has 1 channels. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. In order to avoid damage to the product, instrumentation amplifier should only be used at temperatures below 85°C. 1 elements make up the design of this buffer amplifier. This electric component can work from a voltage of under 5.25V as far as supply voltage is concerned. The linear amplifier's supply voltage should be higher than 2.5V.