LTC6246IS6#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC6246 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-G6 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 2.7/5V |
| Number of Circuits | 1 |
| Current - Supply | 1.25mA |
| Slew Rate | 90V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 400nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.25V ±1.25V~2.625V |
| Gain Bandwidth Product | 180MHz |
| Unity Gain BW-Nom | 180000 kHz |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 120MHz |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
LTC6246IS6#TRMPBF Overview
Packaged in a SOT-23-6 Thin, TSOT-23-6 case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used for delivering the op amp. We are approaching the 6h termination of the year. Buffer amplifier has a total of 6 pins on it. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The mounting type that is recommended for this electrical part is Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureOn this instrumentation amplifier, there are 1 circuits that are connected together. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. It is recommended that you use an 1.25mA power supply with this electrical part in order for it to operate correctly.
LTC6246IS6#TRMPBF Features
6 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
LTC6246IS6#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6246IS6#TRMPBF Instrumentational OP Amps applications.
- Proportional counter tubes
- Addition operation circuits
- Car stereo
- Weak signal detection
- Signal operation
- Mobile phone
- Displayers for aircraft and air transportation control systems
- Cinema or auditorium audio system
- PDA
- Micro signal measurement
