LTC6247IMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC6247 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 1.25mA |
| Supply Current-Max | 3.6mA |
| Slew Rate | 90V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 400nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.25V ±1.25V~2.625V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 180MHz |
| Unity Gain BW-Nom | 180000 kHz |
| Voltage Gain | 93.06dB |
| Average Bias Current-Max (IIB) | 1.5μA |
| Power Supply Rejection Ratio (PSRR) | 69dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 120MHz |
| Bias Current-Max (IIB) @25C | 1μA |
| Programmable Power | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC6247IMS8#PBF Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. The instrumentation amplifier in this picture is of the General Purpose-type. In the case of Tube cases, linear amplifier will be delivered. The number of terminations is approaching the 8 mark. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 100μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~85°C. This op amp can operate from a supply current at 1.25mA. There should be no change in the voltage gain. A instrumentation amplifier like this has 2 circuits. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply.
LTC6247IMS8#PBF Features
8 Pins
supply voltage of 5V
93.06dB voltage gain
Output Type: Rail-to-Rail
LTC6247IMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6247IMS8#PBF Instrumentational OP Amps applications.
- Signal amplification
- earphone
- Displayers for aircraft and air transportation control systems
- Band-pass filter
- Weak signal detection
- Radar
- Medical instruments
- Non-polarized electrodes
- Wireless base stations
- E-book readers
