LTC6247ITS8#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 Thin, TSOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC6247 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Operating Supply Current | 1.25mA |
| Supply Current-Max | 3.6mA |
| Slew Rate | 90V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 400nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.25V ±1.25V~2.625V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 180MHz |
| Unity Gain BW-Nom | 180000 kHz |
| Voltage Gain | 93.06dB |
| Average Bias Current-Max (IIB) | 1.5μA |
| Power Supply Rejection Ratio (PSRR) | 69dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 120MHz |
| Bias Current-Max (IIB) @25C | 1μA |
| Programmable Power | NO |
| Height Seated (Max) | 1mm |
| RoHS Status | ROHS3 Compliant |
LTC6247ITS8#TRMPBF Overview
In order to protect the op amps, a SOT-23-8 Thin, TSOT-23-8 case is used. Buffer amps of this type are called General Purpose-types. The op amp is delivered to you in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 100μV. This electronic part is best mounted with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureAs long as the supply current of the chip does not exceed 1.25mA, this op amp ic can operate. Op amp is a member of the 93.06dB's 93.06dB family. There are 2 circuits on op amps. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. TAPE AND REEL is adopted to pack the instrumentation amplifier.
LTC6247ITS8#TRMPBF Features
8 Pins
supply voltage of 5V
93.06dB voltage gain
Output Type: Rail-to-Rail
LTC6247ITS8#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6247ITS8#TRMPBF Instrumentational OP Amps applications.
- Power control
- Gaming industry
- Logarithmic operation circuits
- pH (acidity)
- Fast A/D and D/A converters
- High speed sample
- Radiation thermometry transducers
- Exponential operation circuits
- Industrial control system
- Weak signal detection
