LTC6248HMS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2015 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC6248 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 2.7/5V |
| Number of Circuits | 4 |
| Operating Supply Current | 1.25mA |
| Slew Rate | 90V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 400nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.25V ±1.25V~2.625V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 180MHz |
| Unity Gain BW-Nom | 180000 kHz |
| Voltage Gain | 93.06dB |
| Average Bias Current-Max (IIB) | 1.5μA |
| Power Supply Rejection Ratio (PSRR) | 69dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 120MHz |
| Bias Current-Max (IIB) @25C | 1μA |
| Programmable Power | NO |
| Height Seated (Max) | 1.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC6248HMS#PBF Overview
In the package, you will find a 16-TFSOP (0.118, 3.00mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used to deliver the buffer op amp. It is estimated that there will be at least 16 terminations this year. There are a total of 16 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. A total of 16 pins are present on the instrumentation amplifier. The input offset voltage is 100μV. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . As long as the supply current of the chip does not exceed 1.25mA, this op amp ic can operate. Maintain 93.06dB as the voltage gain. The buffer amp consists of 4 circuits in total. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. There are 4 elements in total in this linear amplifier.
LTC6248HMS#PBF Features
16 Pins
supply voltage of 5V
93.06dB voltage gain
Output Type: Rail-to-Rail
LTC6248HMS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6248HMS#PBF Instrumentational OP Amps applications.
- Communication
- Signal operation
- Band-pass filter
- Multimedia playback equipment
- Signal filtering
- Portable media players
- Signal amplification
- Weak signal detection
- Automation control systems
- High-frequency data acquisition systems
