Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 Thin, TSOT-23-6 |
Surface Mount |
YES |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
2.7V |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
LTC6252 |
Pin Count |
6 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Number of Elements |
1 |
Power Supplies |
2.7/5V |
Number of Circuits |
1 |
Operating Supply Current |
4.25mA |
Supply Current-Max |
5.9mA |
Slew Rate |
280V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
85 dB |
Current - Input Bias |
1.4μA |
Voltage - Supply, Single/Dual (±) |
2.5V~5.25V ±1.25V~2.625V |
Output Current per Channel |
100mA |
Input Offset Voltage (Vos) |
50μV |
Unity Gain BW-Nom |
630000 kHz |
Voltage Gain |
95.56dB |
Average Bias Current-Max (IIB) |
0.7μA |
Power Supply Rejection Ratio (PSRR) |
68dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
5.5V |
Voltage - Input Offset |
100μV |
Low-Bias |
NO |
Micropower |
NO |
-3db Bandwidth |
400MHz |
Bias Current-Max (IIB) @25C |
2.5μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
720MHz |
Wideband |
YES |
Length |
2.9mm |
RoHS Status |
ROHS3 Compliant |
LTC6252IS6#TRMPBF Overview
In order to protect the op amps, a SOT-23-6 Thin, TSOT-23-6 case is used. A General Purpose-type buffer amplifier is shown here. A Tape & Reel (TR) case is used for delivering the op amp. A total of 6 terminations have been reported in the past few weeks. In this case, there are 6 pins on the board. This linear amplifier should be powered by an 2.7V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. An 6-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 50μV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Using an 4.25mA supply current, this operational amplifier ics can be operated. 95.56dB should be the voltage gain. On this instrumentation amplifier, there are 1 circuits that are connected together. On the output type, there are Rail-to-Rail different types of op amps. A total of 1 elements are present in this linear amplifier. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method.
LTC6252IS6#TRMPBF Features
6 Pins
supply voltage of 2.7V
95.56dB voltage gain
Output Type: Rail-to-Rail
LTC6252IS6#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6252IS6#TRMPBF Instrumentational OP Amps applications.
- Multiplication circuits
- Band-stop filter
- Band-pass filter
- Logarithmic operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Broadcasting
- High input resistance broadband
- Television broadcasting equipment
- Non-polarized electrodes