LTC6253IMS-7#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC6253 |
| Pin Count | 10 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Operating Supply Current | 4.25mA |
| Supply Current-Max | 11mA |
| Slew Rate | 280V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 1.4μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.25V ±1.25V~2.625V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 2 GHz |
| Gain Bandwidth Product | 720MHz |
| Unity Gain BW-Nom | 1300000 kHz |
| Average Bias Current-Max (IIB) | 5μA |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 400MHz |
| Programmable Power | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.6μA |
| Voltage Gain-Min | 1800 |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC6253IMS-7#PBF Overview
There is a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. An op amp ic of the General Purpose type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 10 terminations this year. The pins on this board total to 10 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.7V. Instrumentation amplifier is a part of Operational Amplifier. In total, the buffer amplifier consists of 10 pins. Op amp ic rates 100μV for input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureA supply current of 4.25mA can be used to operate this linear amplifier. The buffer amp consists of 2 circuits in total. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. There is a minimum voltage gain of 1800 that this buffer op amp is capable of conducting.
LTC6253IMS-7#PBF Features
10 Pins
supply voltage of 2.7V
Output Type: Rail-to-Rail
LTC6253IMS-7#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6253IMS-7#PBF Instrumentational OP Amps applications.
- E-book readers
- High speed sample
- Navigation
- Professional videography
- Power control
- Comparator
- Medical instruments
- Signal operation
- Division circuits
- High-frequency data acquisition systems
