LTC6253IMS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC6253 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 4.25mA |
| Supply Current-Max | 11.8mA |
| Slew Rate | 280V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 1.4μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.25V ±1.25V~2.625V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 50μV |
| Unity Gain BW-Nom | 630000 kHz |
| Voltage Gain | 95.56dB |
| Average Bias Current-Max (IIB) | 0.7μA |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 400MHz |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 720MHz |
| Wideband | YES |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6253IMS#PBF Overview
Packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. A General Purpose-type buffer amplifier is shown here. Linear amplifier is delivered in a Tube case. A total of 10 terminations have been reported in the past few weeks. In total, there are 10 pins on this op amp ic. This linear amplifier should be powered by an 2.7V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. There are 10 pins on this chip. There is an input offset voltage of 50μV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Using a supply current of 4.25mA , this buffer op amp will be able to operate. Voltage gain should remain at 95.56dB. There are 2 circuits on op amps. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. There is a rating of 2 for the operating supply voltage of the buffer op amp.
LTC6253IMS#PBF Features
10 Pins
supply voltage of 2.7V
95.56dB voltage gain
Output Type: Rail-to-Rail
LTC6253IMS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6253IMS#PBF Instrumentational OP Amps applications.
- Portable docking station
- Biopotential
- Instrumentation
- Active probe
- Portable electronic products powered by batteries
- Logarithmic operation circuits
- Signal operation
- Signal amplification
- Home audio systems
- Inverse/same-phase proportional circuit
