LTC6253ITS8#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 Thin, TSOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC6253 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 4.25mA |
| Slew Rate | 280V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 1.4μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.25V ±1.25V~2.625V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 50μV |
| Unity Gain BW-Nom | 630000 kHz |
| Voltage Gain | 95.56dB |
| Average Bias Current-Max (IIB) | 0.7μA |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 400MHz |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 720MHz |
| Wideband | YES |
| Height Seated (Max) | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6253ITS8#TRMPBF Overview
There is a SOT-23-8 Thin, TSOT-23-8 case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 2.7V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. An 8-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 50μV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 4.25mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 95.56dB. A instrumentation amplifier like this has 2 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. There is a rating of 2 for the operating supply voltage of the buffer op amp. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method.
LTC6253ITS8#TRMPBF Features
8 Pins
supply voltage of 2.7V
95.56dB voltage gain
Output Type: Rail-to-Rail
LTC6253ITS8#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6253ITS8#TRMPBF Instrumentational OP Amps applications.
- earphone
- Industrial control system
- Communication
- Comparator
- single/dual op amp sum and difference circuits
- High-frequency data acquisition systems
- Exponential operation circuits
- Portable docking station
- RF cable systems
- Power generator
