LTC6254HMS#PBF

100mA per Channel 1.4μA 85 dB Instrumentational OP Amps 0.7μA 2.5V~5.25V ±1.25V~2.625V LTC6254 16 Pins 16-TFSOP (0.118, 3.00mm Width)

Manufacturer: Linear Technology/Analog Devices
Nocochips NO: 471-LTC6254HMS#PBF
Package: 16-TFSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 459
Description: 100mA per Channel 1.4μA 85 dB Instrumentational OP Amps 0.7μA 2.5V~5.25V ±1.25V~2.625V LTC6254 16 Pins 16-TFSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-TFSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C
Packaging	Tube
Published	2012
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	4
Supply Voltage	2.7V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	LTC6254
Pin Count	16
Qualification Status	Not Qualified
Output Type	Rail-to-Rail
Number of Elements	4
Power Supplies	2.7/5V
Number of Circuits	4
Operating Supply Current	4.25mA
Supply Current-Max	23.6mA
Slew Rate	280V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	85 dB
Current - Input Bias	1.4μA
Voltage - Supply, Single/Dual (±)	2.5V~5.25V ±1.25V~2.625V
Output Current per Channel	100mA
Input Offset Voltage (Vos)	50μV
Unity Gain BW-Nom	630000 kHz
Voltage Gain	95.56dB
Average Bias Current-Max (IIB)	0.7μA
Power Supply Rejection Ratio (PSRR)	68dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	5.5V
Voltage - Input Offset	100μV
-3db Bandwidth	400MHz
Bias Current-Max (IIB) @25C	2.5μA
Nominal Gain Bandwidth Product	720MHz
Wideband	YES
Height Seated (Max)	1.1mm
RoHS Status	ROHS3 Compliant

LTC6254HMS#PBF Overview

It is packaged in an 16-TFSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. General Purpose-type instrumentation amplifiers are used in this application. The op amp is delivered to you in a Tube case. During the past two weeks, there have been close to 16 terminations. Linear amplifier has a total of 16 pins. I would like to remind you that this buffer op amp should be powered by an 2.7V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 16 pins are included on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 50μV. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 4.25mA . You should keep the voltage gain at 95.56dB for the time being. A instrumentation amplifier like this has 4 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. There are 4 elements in this buffer amplifier.