LTC6255CS6#TRPBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 65μA |
| Slew Rate | 1.8 V/μs |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 5nA |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 6.5MHz |
| Voltage Gain | 106.02dB |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| -3db Bandwidth | 4.5MHz |
| Nominal Gain Bandwidth Product | 6.5MHz |
| RoHS Status | RoHS Compliant |
LTC6255CS6#TRPBF Overview
A SOT-23-6 case is used to package the op amp. A total of 6 pins are present on the instrumentation amplifier. There is an input offset voltage of 100μV for this buffer op amp. This op amp can operate from a supply current at 65μA. There should be no change in the voltage gain. The buffer amp consists of 1 circuits in total. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below 0°C degrees Celsius. You should not use op amp above 70°C degrees. There are 1 elements in total in this linear amplifier. It is important to keep in mind that the power supply voltage of this electric component is below 5.25V, which is suitable. It is advised to keep the op amp's supply voltage higher than 1.8V.
LTC6255CS6#TRPBF Features
106.02dB voltage gain
LTC6255CS6#TRPBF Applications
There are a lot of Analog Devices, Inc. LTC6255CS6#TRPBF Instrumentational OP Amps applications.
- Scintillation detectors
- Vehicle electronics
- Thermocouples
- Image computer boards
- Band-stop filter
- High speed sample
- Integrator circuits
- Proportional operation circuits
- Gaming industry
- Industrial applications including automation
