LTC6255HS6#TRMPBF
| Parameters | |
|---|---|
| Voltage Gain | 106.02dB |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | NO |
| Micropower | YES |
| -3db Bandwidth | 4.5MHz |
| Bias Current-Max (IIB) @25C | 0.035μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 6.5MHz |
| Wideband | NO |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC6255 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 65μA |
| Supply Current-Max | 0.09mA |
| Slew Rate | 1.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 5nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.25V ±0.9V~2.625V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 6.5MHz |
| Unity Gain BW-Nom | 6500 kHz |
LTC6255HS6#TRMPBF Overview
Packaged in a SOT-23-6 Thin, TSOT-23-6 case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the General Purpose-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 6 mark. Buffer amplifier has a total of 6 pins on it. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 6 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 100μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 65μA can be used to operate this linear amplifier. You should keep the voltage gain at 106.02dB for the time being. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. The linear amplifier is packaged by using a TAPE AND REEL axis.
LTC6255HS6#TRMPBF Features
6 Pins
supply voltage of 5V
106.02dB voltage gain
Output Type: Rail-to-Rail
LTC6255HS6#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6255HS6#TRMPBF Instrumentational OP Amps applications.
- Test and measurement instruments
- Power transmission
- Laptop
- Logarithmic operation circuits
- Band-pass filter
- Communication
- Division circuits
- Power generator
- Medical instruments
- Automatic control
