LTC6256IMS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2015 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC6256 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 1.8/5V |
| Operating Supply Current | 65μA |
| Slew Rate | 1.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 5nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.25V ±0.9V~2.625V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 6.5MHz |
| Unity Gain BW-Nom | 6500 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.06μA |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Micropower | YES |
| -3db Bandwidth | 4.5MHz |
| Bias Current-Max (IIB) @25C | 0.05μA |
| Nominal Gain Bandwidth Product | 6.5MHz |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC6256IMS#PBF Overview
It is packaged in an 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. This is a General Purpose type op amp. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. There have been a total of 10 terminations over the past year. The total number of pins on linear amplifier is 10. It is important to remember that this op amp should be operated at a voltage of 5V volts. Instrumentation amplifier is a part of Operational Amplifier. 10 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 100μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 65μA and 10 . Maintain 106.02dB as the voltage gain. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. A total of 2 elements are present in this linear amplifier.
LTC6256IMS#PBF Features
10 Pins
supply voltage of 5V
106.02dB voltage gain
Output Type: Rail-to-Rail
LTC6256IMS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC6256IMS#PBF Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- Mobile phone
- Thermocouples
- Medical imaging
- Proportional operation circuits
- Integrator circuits
- Multimedia playback equipment
- Commercial audio systems
- Navigation
- earphone
