LTC6256ITS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 Thin, TSOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC6256 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Operating Supply Current | 65μA |
| Slew Rate | 1.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 5nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.25V ±0.9V~2.625V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 6.5MHz |
| Unity Gain BW-Nom | 6500 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.06μA |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Micropower | YES |
| -3db Bandwidth | 4.5MHz |
| Bias Current-Max (IIB) @25C | 0.035μA |
| Nominal Gain Bandwidth Product | 6.5MHz |
| Height Seated (Max) | 1mm |
| RoHS Status | ROHS3 Compliant |
LTC6256ITS8#TRPBF Overview
In order to protect the op amps, a SOT-23-8 Thin, TSOT-23-8 case is used. General Purpose-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 100μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing a supply current of 65μA , this buffer op amp will be able to operate. 106.02dB should be the voltage gain. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted.
LTC6256ITS8#TRPBF Features
8 Pins
supply voltage of 5V
106.02dB voltage gain
Output Type: Rail-to-Rail
LTC6256ITS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6256ITS8#TRPBF Instrumentational OP Amps applications.
- Commercial audio systems
- pH (acidity)
- Band-stop filter
- earphone
- Medical imaging
- Differentiator circuits
- RF cable systems
- Proportional counter tubes
- Information processing
- Weighing systems
